基于深度学习的嵌入式汽车内饰件装配检测
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

沈阳市重大科技成果转化专项(20-203-5-40); 辽宁省工业重大专项(2019030151-JH1/101)


Embedded Automotive Interior Parts Assembly Inspection Based on Deep Learning
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    汽车内饰件装配后的质量检测是装配的重要阶段, 是确保内饰件装配高通过率的重要保障. 以低功耗高性能英伟达的开发板搭建目标检测硬件平台, 对比Faster RCNN与YOLOv5模型, 采用对小目标检测效果更好的YOLOv5模型训练工业摄像头采集的数据. 试验结果表明, 对汽车内饰装配件13种特征检测的准确率都高达95%以上, 实现了对汽车内饰装配件高效精准的判别, 为汽车内饰件的装配工作提供了可靠的辅助手段.

    Abstract:

    The quality inspection after assembly of automotive interior parts is an important stage of assembly and an important guarantee for ensuring a high pass rate of interior parts assembly. The target detection hardware platform is built with low-power and high-performance NVIDIA development boards, and the Faster RCNN and YOLOv5 models are compared, and the YOLOv5 model, which has a better detection effect on small targets, is used to train the data collected by industrial cameras. The test results show that the accuracy of detecting 13 features of automobile interior fittings is as high as 95%, which realizes the efficient and accurate discrimination of automobile interior fittings and provides reliable auxiliary means for the assembly work of automobile interior fittings.

    参考文献
    相似文献
    引证文献
引用本文

谭任,唐忠,王鸿亮,王帅.基于深度学习的嵌入式汽车内饰件装配检测.计算机系统应用,2022,31(4):110-116

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-06-27
  • 最后修改日期:2021-07-29
  • 录用日期:
  • 在线发布日期: 2022-03-22
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号