整车汽车物流共同配送模式设计与仿真
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家软科学研究计划部市合作重大项目(2008GXS1D042)


Designing and Simulation of Common Distribution Mode of Finished Vehicle Logistics
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    整车汽车物流是我国汽车产业的重要组成部分,存在着诸多问题,特别是运力浪费导致物流效率低下,物流成本居高.首先建立整车汽车物流配送的VRP模型,通过Matlab编程,用遗传算法求解模型,得出了较优的配送路线方案,并用Flexsim软件进行了仿真分析和验证.接着对返程带货问题提出了采用整车汽车物流共同配送模式的解决方案,通过仿真分析,验证了共同配送的合作模式可以有效地降低空驶率和节约运输成本.

    Abstract:

    Finished Vehicle Logistics (FVL) is an important component of the national automotive industry. There are problems in it especially the problem of waste of capacity, which makes the efficiency of logistics low and make the cost high. In this paper, the VRP pattern is built and solved by Genetic Algorithm(GA) through Matlab at first, resulting in a good distribution plan, and the plan is simulated and analyzed by Flexsim. Second, the pattern of FVL common distribution is designed to solve the backhaul problem. At last, the common distribution is simulated and analyzed by Flexsim to show that cooperation can get the rate of wasting capacity lower and reduce the cost.

    参考文献
    相似文献
    引证文献
引用本文

王婷,刘峰涛.整车汽车物流共同配送模式设计与仿真.计算机系统应用,2011,20(8):122-125

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-12-09
  • 最后修改日期:2011-01-13
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号