多重虚拟三维物体菲涅耳全息水印方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省教育厅B类项目(JB11020)


Method on Fresnel Holographic Watermark of Multiple Virtual Three-Dimensional Objects
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    提出一种基于菲涅耳全息变换和OFDM的多重虚拟三维物体水印实现方法, 首先利用快速卷积算法分别计算观测面上单个虚拟三维物体的菲涅耳衍射分布, 然后结合OFDM原理通过串并转换、共轭对称、IFFT和并串转换处理实现多个三维物体实值编码计算全息水印信号的设计; 水印信号嵌入在载体文件小波域的水平和垂直细节分量, 通过修改小波系数邻域平均值隐藏信息, 并能实现盲提取. 仿真实验结果表明, 所提出的方法对剪切、滤波、JPEG压缩等攻击表现出较强的稳健性, 特别是具有良好的抗剪切性能.

    Abstract:

    A watermark method on Fresnel hologram transformation and OFDM for multiple three-dimensional objects has been proposed. First, the fast convolution algorithm is used to calculate the Fresnel diffraction distribution of the single virtual three-dimensional object in the observed plane. Then, combining with OFDM principle procedures such as parallel-serial conversion, conjugate symmetry, IFFT and parallel-serial conversion are followed to design real coding computer-generated holographic watermark. Watermark signal is embedded in the horizontal and vertical detail components of the wavelet domain by changing neighbor wavelet coefficient to hide information and the watermark can be blind extracted. The simulation results show that the approach behaves good robustness on cropping, filtering, JPEG compression, etc. Especially the approach shows good performance for cropping operation.

    参考文献
    相似文献
    引证文献
引用本文

陈家祯,郑子华,叶锋,连桂仁,许力.多重虚拟三维物体菲涅耳全息水印方法.计算机系统应用,2015,24(8):33-39

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-12-15
  • 最后修改日期:2015-02-02
  • 录用日期:
  • 在线发布日期: 2015-09-03
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号