基于本体的钻具组合智能设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“十三五”重大专项(2017ZX05009-001)


Intelligent Drilling Assembly Design Based on Ontology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    为提高钻具组合设计过程中的设计知识利用率和设计效率,提出一种基于本体的钻具组合智能设计方法.该方法通过构建井眼参数、地层参数、模型知识以及钻井工程实例的本体模型,实现了对钻具组合设计知识的表示,构建钻具组合设计知识库,建立了本体间的语义映射关系,完成了对钻具组合设计知识的组织、推送和嵌入.最后,结合基于案例的推理方法,实现了对钻具组合的智能设计.

    Abstract:

    In order to improve the design knowledge utilization and design efficiency in drilling assembly design, an intelligent design method based on ontology is proposed in this study. The method realizes the representation of the design knowledge of the drilling assembly and constructs the knowledge base of the design of the drilling assembly by constructing ontology model including borehole parameters, formation parameters, model knowledge, and drilling engineering base. In the method, the semantic mapping relations among ontologies are built. Thus an intelligent drilling assembly design pattern was formed and the organization, push and embedding of design knowledge are realized. Combining the case-based reasoning method, the intelligent design of drilling assembly is realized.

    参考文献
    相似文献
    引证文献
引用本文

邵波,段友祥,孙歧峰,李洪强.基于本体的钻具组合智能设计.计算机系统应用,2018,27(6):47-52

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-09-25
  • 最后修改日期:2017-10-18
  • 录用日期:
  • 在线发布日期: 2018-05-29
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号