建筑铝模板分拣线的仿真优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金(61503219)


Simulation and Optimization of Sorting Line for Architectural Aluminum Alloy Formwork
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 增强出版
  • |
  • 文章评论
    摘要:

    国内建筑铝模板周转中的仓储配送效率较低.为提高建筑铝模板周转效率,设计了采用主线分流和分级分拣模式相结合的“八爪鱼”分拣线,利用Flexsim仿真软件对该分拣线的运行做出了可视化仿真,根据数据化的仿真结果分析得到了该分拣线的运行瓶颈,通过优化工艺流程调整分拣人员的分布解决了该瓶颈问题,提高了建筑铝模板的分拣效率.

    Abstract:

    The efficiency of warehousing and distribution in the turnover of architectural aluminum alloy formwork in China is low. In order to improve the turnover efficiency of architectural aluminum alloy formwork, an "octopus" sorting line is designed, which combines the main line shunting and grading sorting modes. Flexsim simulation software is used to make visual simulation of the operation of the sorting line. The operation bottleneck of the sorting line is obtained by analyzing the simulation results based on the data. The bottleneck problem was solved by optimizing the process flow and adjusting the distribution of sorters. It improves the sorting efficiency of architectural aluminum alloy formwork.

    参考文献
    相似文献
    引证文献
引用本文

王兆斌,张运楚,孙鸽,马仁怀,李明.建筑铝模板分拣线的仿真优化.计算机系统应用,2020,29(2):68-75

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-05-20
  • 最后修改日期:2019-06-21
  • 录用日期:
  • 在线发布日期: 2020-01-16
  • 出版日期: 2020-02-15
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京海淀区中关村南四街4号 中科院软件园区 7号楼305房间,邮政编码:100190
电话:010-62661041 传真: Email:csa (a) iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号